usbd_msc_scsi.h File Reference

header for the usbd_msc_scsi.c file More...

#include "usbd_def.h"

Include dependency graph for usbd_msc_scsi.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Classes
struct	_SENSE_ITEM

Macros
#define	SENSE_LIST_DEEPTH   4

Typedefs
typedef struct _SENSE_ITEM	SCSI_Sense_TypeDef

Enumerations
enum	SCSI_Commands {   SCSI_FORMAT_UNIT = 0x04, SCSI_INQUIRY = 0x12, SCSI_MODE_SELECT6 = 0x15, SCSI_MODE_SELECT10 = 0x55,   SCSI_MODE_SENSE6 = 0x1A, SCSI_MODE_SENSE10 = 0x5A, SCSI_ALLOW_MEDIUM_REMOVAL = 0x1E, SCSI_READ6 = 0x08,   SCSI_READ10 = 0x28, SCSI_READ12 = 0xA8, SCSI_READ16 = 0x88, SCSI_READ_CAPACITY10 = 0x25,   SCSI_READ_CAPACITY16 = 0x9E, SCSI_REQUEST_SENSE = 0x03, SCSI_START_STOP_UNIT = 0x1B, SCSI_TEST_UNIT_READY = 0x00,   SCSI_WRITE6 = 0x0A, SCSI_WRITE10 = 0x2A, SCSI_WRITE12 = 0xAA, SCSI_WRITE16 = 0x8A,   SCSI_VERIFY10 = 0x2F, SCSI_VERIFY12 = 0xAF, SCSI_VERIFY16 = 0x8F, SCSI_SEND_DIAGNOSTIC = 0x1D,   SCSI_READ_FORMAT_CAPACITIES = 0x23 }
enum	SCSI_Status {   NO_SENSE = 0, RECOVERED_ERROR = 1, NOT_READY = 2, MEDIUM_ERROR = 3,   HARDWARE_ERROR = 4, ILLEGAL_REQUEST = 5, UNIT_ATTENTION = 6, DATA_PROTECT = 7,   BLANK_CHECK = 8, VENDOR_SPECIFIC = 9, COPY_ABORTED = 10, ABORTED_COMMAND = 11,   VOLUME_OVERFLOW = 13, MISCOMPARE = 14 }
enum	SCSI_ExtStatus {   INVALID_CDB = 0x20, INVALID_FIELED_IN_COMMAND = 0x24, PARAMETER_LIST_LENGTH_ERROR = 0x1A, INVALID_FIELD_IN_PARAMETER_LIST = 0x26,   ADDRESS_OUT_OF_RANGE = 0x21, MEDIUM_NOT_PRESENT = 0x3A, MEDIUM_HAVE_CHANGED = 0x28, WRITE_PROTECTED = 0x27,   UNRECOVERED_READ_ERROR = 0x11, WRITE_FAULT = 0x03, READ_FORMAT_CAPACITY_DATA_LEN = 0x0C, READ_CAPACITY10_DATA_LEN = 0x08,   MODE_SENSE10_DATA_LEN = 0x08, MODE_SENSE6_DATA_LEN = 0x04, REQUEST_SENSE_DATA_LEN = 0x12, STANDARD_INQUIRY_DATA_LEN = 0x24,   BLKVFY = 0x04 }

Functions
int8_t	SCSI_ProcessCmd (USB_OTG_CORE_HANDLE *pdev, uint8_t lun, uint8_t *cmd)
	SCSI_ProcessCmd Process SCSI commands. More...
void	SCSI_SenseCode (uint8_t lun, uint8_t sKey, uint8_t ASC)
	SCSI_SenseCode Load the last error code in the error list. More...
void	SCSI_Init ()

Variables
uint8_t	Page00_Inquiry_Data []
uint8_t	Standard_Inquiry_Data []
uint8_t	Standard_Inquiry_Data2 []
uint8_t	Mode_Sense6_data []
uint8_t	Mode_Sense10_data []
uint8_t	Scsi_Sense_Data []
uint8_t	ReadCapacity10_Data []
uint8_t	ReadFormatCapacity_Data []
SCSI_Sense_TypeDef	SCSI_Sense [SENSE_LIST_DEEPTH]
uint8_t	SCSI_Sense_Head
uint8_t	SCSI_Sense_Tail

Detailed Description

header for the usbd_msc_scsi.c file

Author

MCD Application Team

Version

V1.1.0

Date

19-March-2012

Attention

© COPYRIGHT 2012 STMicroelectronics

Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this file except in compliance with the License. You may obtain a copy of the License at:

   http://www.st.com/software_license_agreement_liberty_v2

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Definition in file usbd_msc_scsi.h.